manualshive.com logo in svg

Dräger Medical Babytherm 8004, Technical Documentation Manual

Share
Download
Dräger Medical Babytherm 8004 Technical Documentation Manual Download Page 102

This test list can be processed with standard commercially available test aids and tools, but does not replace the inspections 
and maintenance work carried out by the manufacturer.

6132.300 Babytherm 8004/8010

 Test List

 

Page 8

K6132300TL1.fm

 24.03.06

Copyright 

reserved. Rep

roduct

ion 

allow

e

d f

o

r non-commer

c

ia

l purposes only.

5

Functional Tests

5.1

Checking the LEDs, the LED Strip and the Buz-
zer in the Control Unit as well as Central Alarm 
Lamp in the Radiant Heater

•

Plug the power cord of the Babytherm 8004 into the mains power 
outlet.

•

Switch on the control unit.

•

Press the "Check" key.

The LEDs and the LED strip on the control unit come on. The central 
alarm lamp in the radiant heater comes on. The buzzer in the control 
unit sounds.

5.1.1

Checking the Infrared Rods in the Manual Mode

•

Switch on the control unit.

•

Set "manual mode" on control unit.

The infrared rods heat up.

5.1.2

Checking the Infrared Rods in the Skin Mode

•

Connect skin-temperature sensors to the Babytherm.

•

Switch on the control unit.

•

Set "skin mode" on control unit.

•

Place fingers firmly around ends of skin-temperature sensor 
cables.

The infrared rods heat up. The temperature displayed on the control 
unit increase.

Summary of Contents for Babytherm 8004















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands