Charging the Handheld Controller batteries
Included with your system is the handheld Ground Control System (GCS) and a standard
handheld controller. The GCS is powered by a smaller capacity 4 Cell LiPo battery and
the standard handheld controller is powered by a 3 Cell LiPo battery.
Charging these batteries is just as simple as charging your helicopter battery. The
connections are the same using the balancer cable and main power charge plug but you
always need to remember that when charging the standard controller, you need to
change the charger cell count from 4 to 3, and reduce your charge current.
To make this change for the standard HHC, from the main charging screen you need to
use the ENT/STOP, INC and DEC buttons. Using these controls adjust the charger to
3sPACK C=1.70A for the Standard controller.
Page 26
Handheld Ground Control System (GCS)
Charger setting = 4sPACK @1.7 Amps
Standard Handheld Controller (HHC)
Charger setting = 3sPACK @1.7 Amps