With the battery connected simply press and hold the
ENT/STOP
button for 3 seconds
and the battery will start charging. At this default charger setting a full charge will take
approximately 2 hours for a depleted battery. For a faster charge time, you can adjust
the current(C=) up to 5.45A for the helicopter batteries only.
To increase the charging current repeatedly press the
ENT/STOP
button until C=3.00A is
flashing on the display, then use the INC and DEC buttons to adjust the charging current
to 5.45A. Press and hold the ENT/STOP button to begin charging. When the battery is
fully charged the charger will display “F-” in the top left corner of the display screen.
Page 25
Balance port
Main power connector
SEL
MODE
ENT/
STOP
+
-
INC
DEC
LiPo Charge[sel]
4sPACK C=3.00A