8
Draganflyer V Ti Assembly
continued
10) Attach decals to the top surface of the blades, mak-
ing sure that the unique color decal goes on the
front blade. The front blade will be one of the 2
counter-clockwise blades.
See photo
8-B
11) Install Velcro tape on the battery tray between the
front and rear vertical risers. Install the opposite
side of Velcro on the battery pack, making sure to
put it on the flat side opposite of the battery wire.
See photo
8-C
12) Attach the canopy front first by inserting the verti-
cal risers’ nubs into the 3 holes on the side of the
canopy. Note: The rear of canopy is not supported
by the rear vertical risers nub.
See photo
8-D
13) Attach the rotors to the black main gears using two
#4-40 x 3/8” nylon mounting screws per rotor. Do
not over-tighten. The front and rear blades are
designed to turn counter-clockwise (front blade has
the unique color decal). The left and right blades
are designed to turn clockwise. Note: The front and
rear blades are shaped identically and the left and
right blades are shaped identically.
See photo
8-E
9)
Attach the carbon fiber battery tray to the bottom
of the vertical risers’ nubs using the four 6/32
Nylon Acorn Nut Caps.
See photo
8-A
14) Congratulations! You are now ready to set the parts
in motion. Refer to Draganflyer V Ti Familiarization.
Enjoy your completed Draganflyer V Ti!
8-A
8-B
8-D
8-E
8-C
DF5_manual_Imposed_Jan4_05 1/7/05 10:38 AM Page 18
Summary of Contents for DraganFlyer V Ti
Page 1: ...INVENTING THE FUTURE OF RADIO CONTROLLED FLIGHT...
Page 21: ...20...
