CONTACT US AT
www.DRpower.com
27
1.
Remove the three Bolts supporting the Belt Guard using a 3/8"
Wrench
(Figure 40).
Remove the Belt Guard and set aside.
2.
Remove the Bolt and Lock Nut securing the Housing Top Plate using two
9/16" Wrenches
(Figure 41).
3.
Remove the Upper Screen Bolt and Lock Nut using two 9/16" Wrenches.
4.
Loosen (but do not remove) the Screen Pivot Bolt, Upper Scroll Bolt and
Lower Scroll Bolt using two 9/16" Wrenches.
5.
Rotate the Housing Top Plate up towards the Hopper, exposing the Screen
(Figure 42).
6.
Rotate the Screen down exposing the Shredder Hammer Assembly
7.
Loosen the four Lock Nuts that hold the Knife Access Plate to the Chipper
Side Plate, using a 1/2" Wrench
(Figure 43)
.
8.
Slide the Knife Access Plate over to align the Lock Nuts with the large holes
in the Knife Access Plate and remove the Knife Access Plate.
9.
Loosen the Lock Nut and Bolt that holds the Hammer Access Plate to the
Side Plate using two 7/16" Wrenches. Rotate the Plate upward to expose the
Access Window
(Figure 44).
10.
Tighten the Bolt and Lock Nut to hold the Hammer Access Plate out of the
way.
Hammer
Access Plate
Access Window
Bolt and Lock
Nut
Figure 44
Shredder
Hopper
Figure 42
Housing
Top Plate
Screen
Shredder
Chamber
Large Hole
in Plate
Figure 43
Lock Nut
Knife Access
Plate
Chipper Side
Plate
Bolts
Belt Guard
Figure 40
Housing
Top Plate
Figure 41
Housing Top
Plate Bolt and
Lock Nut
Upper Screen
Bolt and Lock
Nut
Lower
Screen
Bolt
Lower
Scroll
Bolt
Upper
Scroll
Bolt
