DR Premier Brush, Safety & Operating Instructions Manual

Page: 8 / 32

8 PREMIER
DR
®
FIELD AND BRUSH MOWER
Specifications
MECHANICAL SPECIFICATIONS
Engine Briggs and Stratton
Series Intek
Max. HP 12.5 (9.3 kW)/3600 rpm
Fuel Capacity .75 Gal (2.84 L)
Oil Capacity 48 oz. (1.42 L)
Tire Size 14.5" Pneumatic
Cutting Height 4"
Cutting Width 24"
Cutting Capacity 4' High Grass, 8' High Weeds and Brush, 2" Dia. Saplings
Blade Tip Speed 178 mph (15,700 Ft/Min)
Blade Drive Electric Clutch
Blade Material Hardened Steel
Deck Material 12 GA Welded Steel
Frame Material 12 GA Welded Steel
Drive Transaxle – 3Forward Gears, 1 Reverse Gear
Belts Drive and Blade – V-Belts
Machine Width, Length, 72"L, 28-1/2"W, 39"H
Dry Weight 215 lbs.
Operating Weight 220 lbs.
SHIPPING SPECIFICATIONS
Shipping Weight 285 lbs.
Shipping Dimensions 82"L, 36"W, 46"H
Unpacking the PREMIER DR FIELD and BRUSH MOWER
Tools and Supplies Needed:
•
Screwdriver
•
Metal Shears
•
Utility Knife
•
Gloves and Eye Protection
1.
Stand to one side and cut the banding.
2.
Remove the top of the carton. Separate the stapled vertical cardboard ends from the pallet to access the pallet
straps. Be careful of the staples.
3.
Pry off the fasteners and cut any ties holding the machine to the pallet.
4. Roll the mower off the pallet. Do not discard your pallet and packaging material until you are fully satisfied with your new
PREMIER DR FIELD and BRUSH MOWER.
•
Wear eye protection when cutting the banding. The banding may have a lot of tension on
it and may snap and cut you.
Always stand to one side when cutting the band.
•
Stabilize the shipping container on clean flat terrain before attempting to unpack and assemble the machine.