TO AMP
TO SPEAKER
ATTENUATOR
BRAKE - LITE
Instructions:
- Unplug amplifier from the AC outlet.
- Remove adhesive backing, mount Brake Lite on the side wall of your combo. You may need to reroute
your AC cord for proper clearance.
- Use 2 screws (supplied) to secure Brake Lite.
- Unplug speaker from amplifier chassis and plug into the “TO SPEAKER” jack on bottom of Brake Lite.
- Insert plug from the “TO AMP” on Brake Lite into the SPEAKER OUT jack on your amplifier chassis.
- Always match the speaker out jack on your amp to your combo speaker (use 8 ohm speaker out with
8 ohm speaker).
*
Brake Lite must be mounted to combo cabinet for proper operation.
* For use only with amplifiers up to but not exceeding 45 watts.
Attenuation increments set by Dr. Z Amps for optimum results:
0 = 0dB
1= 2dB
2 = 5dB
3 = 8dB
4 = 11dB