6.4
Measuring procedure
6.4.1Measuring in standard mode
In this mode has IHB (Irregular Heart Beat) detection but no Afib detection
After the cuff has been appropriately positioned, the measurement can begin:
a)
Press the
button, the pump begins to inflate the cuff. In the display,
the
increasing cuff-pressure is continually displayed.
b)
Cuff fitting detection: the icon
will appear and blink during measuring, if cuff was fit too
loose. The icon
will appear during measuring , if cuff was fit well
c)
Arm movement detection during measuring: the icon
will appear , if a movement was
detected which may influence accuracy . due to the movement not too serious , the measuring
can be continuous ( if the movement is too serious , Err2
displayed )
d) After reaching the inflation pressure, the pump stops and the
pressure slowly falls away. The cuff-pressure (large characters) is
displayed during the measurement. When the device has detected the
pulse, the heart symbol in the display begins to blink
e) When the measurement has been concluded, the measured systolic
and diastolic blood-pressure values as well as the pulse frequency are
now displayed.
Example 1: Systole 120, Diastole 80, Pulse 70,
And IHB (Irregular Heart Beat) detected, cuff fit well.
