– 11 –
Fasten the child into the child seat for group 1
•
With the harness open, place your child into the child seat. Place the shoulder straps
R
over
your child's shoulders.
11
•
The headrest is adjustable
B
. Adjust the headrest by pushing the headrest up or down so that
the head of the child lies perfectly in the middle of the headrest
12
.
•
Fasten the buckle
D
by bringing together the two prongs of the harness strap
R
and push into
the buckle until your hear a click.
13
•
Make sure that the shoulder pads
L
sit correctly on the child's shoulders. Tighten the shoulder
straps
R
by tightening the harness adjustment strap
H
. Your child must be comfortable but
securely fastened in.
14
Usage of the cild seat in group ii + iii
remove the harness for group 2 + 3
•
Remove the back lid on the backside of the child seat by pulling out four plastic screws on the
sides of the back lid.
3
•
From behind the seat, unhitch the harness straps from the yoke
S
5
and pull the straps
through to the front of the seat.
6
Untie the shoulder pad cords
L
and pull these through to
the front of the seat.
7
•
Remove the belt tongues and then you can pull out the belt completely out of the seat.
15
•
Remove the seat plate from the bottom of the seat and take the seat belt lock out of the bottom
part.
16
Then press the seat back in place.
•
Mount the back lid with four plastic screws on the sides of the child seat.
Fasten the child into the child seat for group 2 with headrest.
•
Place the seat on the vehicle seat, ensuring it's backrest
A
be placed firmly against the vehicle
seat and has not to be bent backward.
•
Place your child into the child seat.
17
•
Thread the diagonal belt in the side belt notches
N
and pull it alongside the backrest of the seat.
17
The lap belt goes both sides through the belt notches
E
.
•
Insert the lap and diagonal belt into the seat belt buckle. You will hear a click when it is correctly
inserted. Pull on it to check it is securely fitted.
Summary of Contents for MediSafe City Traveller
Page 56: ... 55 ...
