WAN Settings
Page 74 of 147
TAINY iQ
Dead Peer
Detection (DPD)
The Dead Peer Detection identifies whether the IPsec connection
between two networks is still valid or if the connection has to be re-
established. This function presumes though that it is supported on both
sides.
Caution
Risk of additional costs
Due to sending DPD request as well as the use of NAT-T the number of
send and receive data will increase. Depending on the selected settings
the additional data volume might be 5 MB or more per month. This could
lead to additional costs.
Enable Dead Peer Detection
Select “
Yes
” to use the function. TAINY IQ-LTE will now identify the
validity of the connection irrespectively data transmission.
Select “
No
” to switch the function off.
DPD Delay
Lapse of time in seconds the DPD-requests are send.
DPD Timeout
Lapse of time (in seconds) after which the DPD-request is considered
failed if no answer is received. This is also the interval after which the next
request is send until the connection is finally interrupted.
Maximum DPD Retries
Number of permitted retries until the IPsec connection is considered
interrupted.
Summary of Contents for TAINY IQ-LTE
Page 1: ...TAINY IQ LTE User Manual ...