Installation
Page 26 of 147
TAINY iQ
3.4 Ethernet Ports (ETH0 and ETH1)
The Ethernet Port ETH1 (10/100 Base-T) is used to connect the local
network with local applications e.g. a programmable controller, a machine
with an Ethernet interface for remote monitoring, or a notebook or desktop
PC.
The TAINY IQ-LTE acts as a switch between the available interfaces.
To set up the TAINY IQ-LTE, connect the Admin PC with Web browser here.
The Ethernet Ports ETH0 is dedicated to establish wired WAN-DSL/LAN
connections, however it can also be used as an additional port to connect
the local network with local applications. See chapter 0
CAT5 cables shall be used. All interfaces supports auto negotiation. It is
thus detected automatically whether a transmission speed of 10 Mbit/s or
100 Mbit/s is used on the Ethernet. It is also automatically detected whether
cross-over or one-to-one cables are used.
3.5 Antenna socket
The TAINY IQ-LTE has two MIMO antenna-system jacks to connect the
antennas.
Please make sure, that during operation always an antenna is connected to
the TAINY IQ-LTE.
Requirements for the antenna::
Passive,
azimuthally,
omnidirectional, vertical polarisation, gain < 1,5 dBi,
VSWR <
2,0:1, impedance 50 Ω, matched for the used frequency bands.
See chapter 18 for a list of supported frequency bands.
Which frequency bands are actually used at the location is dependent on the
country and the network operator. Contact your network operator for this
information Please obtain this information from your network operator.
Caution
Risk of property damage and interference with other devices
Please use only antennas from the accessories line for TAINY IQ-
LTE. These antennas have been tested by us and guarantee the
described product features.
Attention
Risk of diminished transmission and reception
When installing the antenna, a sufficiently good signal quality must
be ensured (CSQ > 11).
Use the signal lamps of the TAINY IQ-LTE which show the signal
quality or the webpage
Status Overview
, see chapter 4.1.
Make sure that there are no large metal objects (e.g. reinforced
concrete) close to the antenna.
Read the
antenna’s installation and user guide before operating it.
Summary of Contents for TAINY IQ-LTE
Page 1: ...TAINY IQ LTE User Manual ...