DPS Telecom D-PK-C16V2, User Manual

Page: 40 / 94

34
How to Send Call (Voice) Notifications (Voice 16 G2 Only) 10.3
The following instructions will guide you through the process of setting up the unit to call your phone when alarms
are triggered. Using your custom call list, the NetGuardian Voice 16 G2 will begin the calling tree to notify the
correct personnel, according to their schedules.
1. Click on the Notifications button in the Provisioning menu. You can setup as many as 8 different notifications.
Begin the setup "wizard" by clicking on Edit for a notification number. In this example, we'll setup Notification 6 to
send an voice alert.
2. At the Notification Setting screen, select the conditions you want to be notified of from the drop down: Notify
on both Alarms and Clears, Notify on Alarms only, Notify on Clears only. (Selecting Notification Disabled
means you will not receive any type of alerts.) Select Voice Call and click Save and Next .
3. At the next screen, you'll select the phone numbers the NetGuardian should call when this particular alarm is
triggered. Make your selections, in order, using the drop down lists. These are the phone numbers you entered in
the
Provisioning > Phone List menu. To jump to this menu and add more numbers, click the Add Phones link in
the title bar. In the Delay field, enter the amount of time that should pass before the NetGuardian attempts to call
the next person on the phone tree. (s = seconds; m = minutes)
NOTE: At the bottom of this screen, you may choose the "Call all numbers" box to disable acking. When
checked, the unit will call all numbers in the list, instead of stopping when the alarm or clear is
acknowledged.