DPS Telecom D-PC-293-10A, User Manual

Page: 16 / 24

14
Installation • Software Provisioning
2.4.3 Monitoring the Expansion Alarm Points
Now that the Expansion points have been provisioned with all of the appropriate information, they may be moni-
tored. (This is helpful to verify the installation.)
1. From the main menu, select C)onfig, then M)onitor, then A)larms, then E)xpansions.
2. Enter the display number that you would like to monitor (12=Expansion shelf 1, 14=shelf 2, and 16=shelf 3,
see section 3.2 for display mapping details).
3. The list of alarms and their status will be displayed, 16 alarms at a time. Press any key to scroll to the next
group of 16 alarms.
4. press ESC to exit the monitoring list.
Fig. 2.4.3 – Monitor the Expansion points from the M)onitor, E)xpansions menu.
s(Y)stem L)ogin P)orts pa(G)ers A)larms R)elays
a(N)alogs p(I)ng info T)imers D)ate/time n(V)ram (ESC) ? A
B)ase E)xpansions (ESC) ? E
Active Displays : 12, 14, 16
Display Number : 12
ID Description Status
1 DOOR ALARM Alarm
2 COMMERCIAL POWER OUT Clear
3 UPS GNRTR RUNNING Clear
4 RECTIFIER 1 Clear
5 RECTIFIER 2 Clear
6 ICY CONDITION Clear
7 GE2 DE-ICER 1 ON Clear
8 GE2 DE-ICER 2 ON Clear
9 GE2 DE-ICER 3 ON Clear
10 GE2 DE-ICER 4 ON Clear
11 Clear
12 Clear
13 Clear
14 Clear
15 Clear
16 Clear
ESC to exit Any key to continue
2.4.4 Saving Changes
After are provisioning information has been entered, you must write the changes to NVRAM.
1. Type ‘V’ for n(V)ram from the E)dit menu.
2. Type ‘W’ to W)rite the changes into memory.
3. Once this is completed, reboot the Net Guardian.The configuration will not take effect until the Net Guardian
is rebooted.