DP CyberSerial, Quick Installation Manual

Page: 4 / 8

4
Driver Installation
Install the board and boot up the Windows, then follow
the instructions below to install the DP CyberSerial PCIe
drivers.
Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Server
2008 R2
1. Insert the driver CD. Close the CD autoplay box if
prompted.
2. Right click Computer , click Manage , click Device
Manager .
3. Right click PCI Device , click Update Driver
Software .
4. Click Browse my computer for driver software .
5. Type D: , then click Next . (Change D: to match your
CD/DVD-ROM drive letter)
6. At Windows has successfully updated your driver
software, click Close .
7. Go back to Device Manager, right click 16C95x
Serial Port under Other Devices, then click Update
Driver Software .
8. Repeat steps 4-6 to complete the installation.
Windows Vista (32-/64-bit) / Server 2008 (32-/64-bit)
1. Insert the driver CD.
2. At the Found New Hardware window, click Locate
and install driver software (recommended) .
3. Click Continue . For Server 2008, skip this step.
4. Click Don't search online . Skip this step if not
prompted.
5. Click I don't have the disc. Show me other options .