2
Layout
Figure 1: DP CyberSerial PCIe Layout
* Note
: If the serial port requires power output,
connect the system power source to board's power
connector. However, most serial devices do not
require additional power through the serial port.
Refer to your serial device's manual for more
information. Included is a "Y" split power adapter
cable, to use in case your power source doesn't have
the proper power connection.
Jumper Settings (J1)
Power output is from
Pin 9
on the 9-pin serial port.
Short 2-3 or no jumper
= 0 volts
Short 1-2
= 5V
Short 3-4
= 12V
Power
Connector
*
Serial Port
(9-pin)
Jumper (J1)
Pin 9
