Doyon ER136, Instructions Manual

Page: 20 / 52

A-14
SEQUENCE TO FOLLOW FOR THE MENU MODE (PERSONALIZED PROGRAM )
1. Press ‘Menu’ button
2. Select 24h or AM/PM (with + or -) and confirm with ‘OK’
3. Set hour (with + or -) and confirm with ‘OK’
4. Set minutes (with + or -) and confirm with ‘OK’
5. Set week day (with + or -) and confirm with ‘OK’
6. Program ON (prog 01) (Starting proofer) and confirm with ‘OK’
7. Set hour (with + or -) and confirm with ‘OK’
8. Set minutes (with + or -) and confirm with ‘OK’
9. Set week day, individual or blocks (with + or -) and confirm with ‘OK’ (See below for possible week
blocks and individual days)
10. Program 02 (prog 02) (Starting refrigeration) and confirm with ‘OK
11. Set hour (with + or -) and confirm with ‘OK’
12. Set minutes (with + or -) and confirm with ‘OK’
13. Set week day, individual or blocks (with + or -) and confirm with ‘OK
14. Two options are now possible :
! Press ‘Menu’ = terminate programming
! Press ‘OK’ = go to a new program ON setting
There are up to 20 memory locations available for 10 OFF and 10 ON commands.
This program can be changed at any time.
Possible week blocks or individual days
Monday * * * *
Tuesday * - * *
Wednesday * - * *
Thursday * - * *
Friday * - * *
Saturday * - * *
Sunday * - *
DELETE A PROGRAM
1. Press ‘Menu’ button, then press ‘OK’ until getting the ‘prog 01’
2. Then select the program that you want to erase with ‘+ or –‘ keys
(you can also press `OK' until the desired program appeared)
3. Press ‘OK’ to go at the flicker hour
4. Press ‘+ or –‘ key until obtaining `--` which flickers at the screen
5. Finally press ‘OK’
!
Note that the programs ON and OFF are erased together. If you delete a single ‘ON’ instruction,
the corresponing ‘OFF’ instruction is also deleted
SELECT AUTOMATIC OR MANUAL MODE
The ‘+’ key serves to change over between automatic (AUTO) to override (OVR) ON and override (OVR)
OFF. This priority changes for the opposite displayed mode each time the key is pressed and will remain
until next change of configuration. It is possible to program several consecutive cycles “ON” or “OFF” to
return to the programmed mode and counter the cancellation effect for an extended period.
These steps are used to
adjust the hour. If the
hour is correct, press
`OK' until step 6