Manual Code 2600103
DOMIX 35 – Rev.7 - 02.09.2014
15/30
8-
ERRORS
All error messages are shown by flashing messages and an intermittent led signalling in the
litres display. The last one can be stopped with the
[STOP/C]
key. Using the
[START]
key the
error message is cancelled and the delivery starts again. On the contrary, the double
[STOP/C]
command cancels the delivery. The possible error messages are listed here
below.
8.1.
Litres-counter error
E r r. L
DISPLAY 1
If no pulses come from the litre counter, after 15” the message “
Err.L
”
appears on the
display. The message is cancellable with the
[STOP/C]
key and the machine turns into a
temporary state where on the upper display is shown the delivered quantity. By pressing
the
[START]
key the delivery continues, by pressing the
[STOP/C]
the machine turns into idle
state.
For relative troubleshooting see paragraph 12-.
8.2.
Probe Error
2 4. 2
P r. E
DISPLAY 2
The “
Pr.E
” message appears on the display referred to the damaged or wrongly
connected probe. The machine is not blocked and it’s possible to be operated.
For relative troubleshooting see paragraph 12-.
8.3.
Power Fail
t E n S
F A I
DISPLAY 3
If there is a tension fall during a water delivery, at the following switch-on the message
“
tEnS FAI
” appears on the display. The message is cancellable with the
[STOP/C]
key and
the machine turns into a temporary state where on the upper display is shown the
delivered quantity. By pressing the
[START]
key the delivery continues, by pressing the
[STOP/C]
the machine turns into idle state.
