A8
INSTRUCTIONS FOR OVEN
BAKING
ONLY BREAD OR PIZZA DOUGH CAN BE BAKED DIRECTLY
ON THE STONES
The suggested temperature may be different depending on the type of dough. Always test with
your products before doing a complete production.
400
o
F/200°C (Croissants – Sweet doughs – Small rolls)
440
o
F/225°C (Baguette bread – round loaf - 10 oz bread and more)
N.B.
Open the doors as little as possible. This will affect the baking.
COOKING TIMER
Set the baking time required with the push button # 16 on the timer.
Press and hold the button
START/STOP # 16
until the display flashes. With the up and down
arrows, adjust the desired time for your cooking. Press the
START/STOP #16
button again to return
to timer mode.
Example: 25 minutes = 25 (on green display)
After setting, push the
START/STOP #16
button. The indicator light, on the
START/STOP #16,
will flash and the green display will begin its countdown. When the time expires, the buzzer will
ring, push the
START/STOP #16
button to stop the buzzer. If you want to add or take off time on
the green display during the baking, use the up and down arrows to re-adjust the time. When the time
expires, the timer will return to its initial time.
N.B.
The timer is simply a reminder for the approximate duration of the baking time. It does not
stop the oven.
STEAM INJECTION
VERY IMPORTANT
STEAM INJECTION WILL ONLY WORK WHEN THE STEAM INDICATOR LIGHT OF
THE STEAM BUTTON IS OFF (NOT FLASHING).
To inject steam in the oven, press and hold the steam button one or two seconds.
N.B.
Do not inject steam more than once each time you bake. Always be sure that the steam is
ready to use (the indicator light of the steam button does not flash) before loading the oven.
EUROPEAN STYLE PROOFER
To inject steam in the proofer, the thermostat must be set at 300ºC. When the pilot light of the
thermostat turns off at 300ºC (this indicates that the steam injection system is ready to use), press and
hold the steam button one or two seconds every 15 minutes to inject steam. The proofer cabinet only
has a steam injection system, it is not a warmer.
Summary of Contents for ARTISAN 1T series
