Downee Spring Gate, Install Manual

Page: 8 / 14

1.
Using Tek screws mount Panel Bracket to the
Solar Panel.
2.
Tek screw the Aerial on top of the Solar Panel Frame.
3.
Bolt the Solar Panel (facing north) to the Panel Post. Leave the carton
covering the Panel.
TIP
If the gate is shaded through the day, position the Solar Panel away
from the gate.
Setting the solar panel’s angle to suit the location
will give maximum charging rate.
PANEL ANGLE
STOP LIMITS
1.
Use the Motor Key to unlock the Motor Arm.
2.
Close the gate. Bolt a Stop in place where
the Arm will sit against it when closed.
3.
Open the gate and add a Stop for the
gate’s open position.
4.
Adjust as needed then tighten all bolts.
SOLAR PANEL
90
0
80
70
60
50
40
30
20
10
Adelaide 34˚
Perth 31˚
Brisbane 27˚
Darwin 12˚
Tasmania 40˚
Melbourne
38˚
Sydney
35˚
Canberra 35˚
Stop
5
Key