10
5.2 Install iPack C6.5
Pre-installation Check
•
Check exterior package
Before opening package, check for damages like holes, cracks or other traces on exterior packing case. If
any abnormity is detected, do not open the package and contact your distributor.
•
Check deliverables
After opening package, check if deliverables are complete. If there is any part missing or damaged,
please contact your distributor.
Accessory list
Accessories
iPack C6.5
1pcs
Fastenings
M8 expansion screw 4pcs
M8*H60 anchor 4pcs
M6 screw 1pcs
Bubble level 1pcs
Grouding wire
1pcs
Terminator
2pcs
Manual
1pcs
Bracket
1pcs
Warranty Card
1pcs
Accessory List
1pcs
5.2.1 Wall Mounted Installation
Step 1.
At least two persons participate the installation.
1.
2.
The other person marks spots of screw driving.
3.
!
CAUTION
•
The weight capacity of wall should exceed 4 times weight of battery.
•
Step 2.
Fix bracket to wall.
1.
Choose alloy drill bit with a diameter of 12 mm and install it to a drill.
2.
Drill in the spots that have been located in step 1 and have at least 60mm drilling depth.
3.
Clean the dust and drive expansion tube into the hole.
4.
One person puts the bracket on wall and keep bubble level horizontal.
5.
The other person drives M8 screw through the bracket into hole till the end.
265mm≤d≤765mm
≥320mm
≥320mm
