WIL-11251-E-03
17
P800 Bolted Plastic
Step 10
Step 11
Due to varying torque values, one of the
following two situations may occur:
1) The outer piston, diaphragm and inner
piston remain attached to the shaft and the
entire assembly can be removed from the
center section.
2) The outer piston, diaphragm and inner
piston separate from the shaft, which
remains connected to the opposite side
diaphragm assembly.
Remove diaphragm assembly from shaft,
secure shaft with soft jaws (a vise fitted with
plywood, plastic or other suitable material)
to ensure shaft is not nicked, scratched or
gouged. Using an adjustable wrench or
rotating counterclockwise by hand, remove
diaphragm assembly from shaft.
DISASSEMBLY / REASSEMBLY
