WIL-10140-E-08
Wilden
®
19
Disassembly / Reassembly
Step 1
Using an appropriate sized Allen wrench,
remove clamp bands that hold the
discharge manifold to the water chambers.
Step 2
Remove discharge manifold. It is now
possible to inspect the outboard o- rings.
Step 3
Remove the o-ring, ball cage and ball
valve from the water chamber. It is now
possible to inspect these parts
.
Using the
o-ring pick, remove the seat and seat
o-ring from the water chamber for further
inspection. If swelling, cracking or other
damage is apparent, these parts must be
replaced.
Step 4
Loosen and remove clamp bands from
around the inlet manifold.
Step 5
Lift center section off of the inlet mani- fold
.
It is now possible to inspect the outboard o-
rings on the inlet manifold.
Step 6
Place center section upside-down on a flat
surface. Remove the o-ring, seat and valve
ball from the bottom of the water chamber.
It is now possible to inspect these parts.
If swelling, cracking or other damage is
apparent these parts must be replaced.
