20/23
NT 1004-C00 09.09 SLC24 SLC36 e
• Drain the pump bearing (see § DRAINING OF BEARING).
• Unscrew the 3 screws
609
.
• Remove the cover
607
and the seal
602
.
• Extract the 2 lip seals
608
.
• Fit 2 new seals
608
, one on each side of the cover, lip directed
towards the interior of the transmission.
• If the seal face is marked, change the ring
507
. Break the
ring with a chisel then fit a new ring after heating it at 90°C
(in an oil bath or at HF).
• Re-mount the cover
607
after placing the seal
602
, greasing
the lips of the seals and greasing between the 2 seals
608
.
• After replacing the drain bung, fill the bearing with 4,5 litres
of oil* (see § DRAINING OF BEARING).
• Screw back the breather
715
.
* Standard oil provided by MOUVEX : CS05 Food synthe-
tic oil (Safety data sheet is supplied with the new pump
and on inquiery)
.
*
Other oil provided by customer.
FOOD SYNTHETIC GREASE :
Compulsory reference because compatible
with the standard MOUVEX bearing oil.
THE PUMP LUBRICANT IS VERY SLIPPERY
AND MAY CAUSE SERIOUS INJURY. ANY
SPILLS MUST BE CLEANED UP.
CAUTION
Slippery lubricant.
Spills should be
cleaned up.
9. CHANGING THE LIP SEAL
