Douwe Egberts Gallery 310 Operating Instructions Manual Download Page 34

Page: 34 / 92

Regular cleaning

Gallery 310

10.2010

Opening and disconnecting
machine

•

Turn the door key clockwise in keyhole

(fig. 9)

and open door.

The power to the brewer motor/s is
now disconnected.

If power is turned on, be careful not
to touch moving parts and electri-
cal components!

Loading cups

Never reach underneath the cup
dispenser for pushing cups up-
wards.

To ensure a trouble free delivery of
cups only anti-statically treated
cups of good quality that are

suitable for the use in vending ma-
chines may be used.

•

Activate the locking clip of the cup
dispenser and tilt the dispenser forwards

(fig. 10).

•

Remove the lid

(fig. 11).

•

Open the plastic bag with cups at the
bottom end (do not remove it).

Do not touch the cups for hygienic
reasons.

Summary of Contents for Gallery 310





























































































Search results

Summary of Contents for Gallery 310

Reviews:

Related manuals for Gallery 310

Brands by name

Popular brands

Douwe Egberts Gallery 310, Operating Instructions Manual

Search results

Summary of Contents for Gallery 310

Reviews:

Related manuals for Gallery 310

Brands by name

Popular brands