18
1. Press first
STOP
and then
and hold
them pressed simultaneously for 3-4
seconds to enter the cleaning mode (fig.
5.4).
Follow the instruction on the display:
PLEASE REMOVE ALL PRODUCT
PACKS
2. Open the dispenser door.
3. Remove the product packs (fig. 5.8).
Note:
It is recommended to use the
included exchange kit, which consists
of clean mixing bowls and sealing
rings, to save time.
Follow the instruction on the display:
PLEASE CLEAN THE COOLING
INTERIOR AND PUT BACK THE
PRODUCT PACKS
4. Clean the doser opening with a
brush and the interior of the cooling
compartment with a clean, damp cloth
(fig. 5.9). Dry with a clean paper cloth.
5. Place the product packs back if they
have not passed the expiry date. Else,
place new product packs.
Follow the instruction on the display:
PLEASE REMOVE AND CLEAN
THE MIXING BOWLS OR USE
EXCHANGE KIT
Fig. 5.8 - Remove packs
Fig. 5.9 - Clean cooling compartment
Clean & Flush
Fig. 5.7 - Place container
Follow the instruction on the display:
PLEASE PLACE FLUSH BIN (MIN.
4L.). PRESS
TO FLUSH
8. Place the container (fig. 5.7) under the
product outlets and press
to start
flushing.
Warning:
The liquids dispensed by the
dispenser are hot! Avoid scalding!
Keep hands and other body parts
away from the dispenser.
The progress is shown in the display.
When done, the dispenser is ready for use.
