Douwe Egberts Cafitesse 4000, Operating Instructions Manual

Page: 51 / 77

Deep cleaning
11.2004 Cafitesse 4000 47
Cleaning the powder trap
•
Take hold of the small handle on the
powder trap and pull out (
fig. 47 ).
•
Separate front and rear parts.
•
Soak both powder trap components in hot
water with cleaning agent.
•
Rinse parts in clean hot water, dry and
relocate items in reverse order.
Cleaning the distributor head
•
Press the frontmost release clip of the
distributor head (a,
fig. 48) and press
upwards from below of head (a, fig. 48).
•
Disassemble distributor head, hoses and
mixing funnels and soak them in hot water
with cleaning agent.
•
If the holder arm for the distributor head is
heavily soiled, clean it as well. Turn the
holder arm for distributor head clockwise
and pull.
Always rinse pipes and hoses after
disassembling the distribution sys-
tem.
When reinstalling the distributor
head with hoses after cleaning,
check that it is seated securely in
the holder arm and that the hoses
are properly relocated.
a
b
47 48