3
3
Cleaning
required
Out of
service
Drip tray
full
Base tray
full
Temperature
low
Branch pipe
error
T
Reference Card Error Types
If it was impossible to remedy the fault, or other type of display message is shown, please
contact the service.
Display
Possible cause
Possible action
The "rinse time period" has passed. Clean
the machine manually, and then use the
rinse function, see the Operating
Instructions.
Turn the machine off and on.
Empty and clean the drip tray. Wipe dry
the sensors.
Empty and clean the base tray. Wipe it
dry and reinsert it.
Install the trough correctly.
Replace the empty ingredient pack with
new one.
Wait until the water is heated sufficiently
(maximum 6 minutes).
Switch machine off and on.
Remove the cup, clean the cup catcher.
Clean the holder arm for branch pipe.
The function "Rinse Time Period" is
active.
The machine has a problem.
The drip tray is full.
Liquid in the base tray.
The trough is not located correctly.
An ingredient pack is empty.
The machine has been turned on recently.
Cup is blocking the movement of the
branch pipe. Grease or dirt is blocking
the movement of the branch pipe.
