Lit. No. 76348, Rev. 01
32
May 15, 2017
DEFAULT CONTROL SETTINGS
Deluxe Control
The values for the deluxe control unit below have
been factory calibrated for the Liqui Maxx™ Sprayer
System and can be changed at any time through
typical control calibration procedures. For more
information on how to calibrate the control, refer to the
RoadMaster™ Reference Manual.
Factory Settings — Deluxe Control
ENGLISH
Tank Set Point
OFF
Fill Tank Size
OFF
Control Speed
-1
Vehicle Number
1
Blast Target Rate
35
Blast Duration
5
Start Time
0(OFF)
Auto Delay Time
1 sec
Valve Polarity
Bypass
Auto Shut-off
ON
Minimum Alarm Speed
0 MPH
Manual Control Enable
ON
Alarm Enable
ON
Default Calibration Values
English
Mode
Acres
Speed Cal
0.189
Flow Cal
148
Min Flow
0.0
Target Rate
30.0
Adjust Rate
5.0
Section 1 Width
96.0
Section 2 Width
96.0
Section 3 Width
96.0
OPERATING AND CALIBRATION INSTRUCTIONS
RoadMaster™ is a trademark of Micro-Trak Systems, Inc.
Downward Spray Nozzle Selection
PBA-300
Select the nozzles to use by referring to the
application rates charts. Rotate the selection wheels
so that the desired nozzle faces downward.
Nozzle Alignment
For consistent brine application, make sure the holes
in the nozzles are aligned with the boom.
Align holes
with boom.
Summary of Contents for SnowEx Liqui Maxx
Page 2: ......