Lit. No. 76348, Rev. 01
31
May 15, 2017
SPRAY BOOM OPERATION
Wing Spray Nozzle Selection
Select the nozzles to use by referring to the
application rates charts. Open the desired nozzles
on the wing by turning the valve handle so that it is
parallel to the nozzle. Close the nozzles not being
used by turning the valve handle perpendicular to the
nozzle.
In some cases it is beneficial to increase or decrease
the distance covered by the wing nozzles by rotating
the nozzle(s) on the wing. Note that this will also affect
the application rate for the spray zone. For details on
how the distance affects the application rate of the
nozzles, see "Calculations" in this section.
OPERATING AND CALIBRATION INSTRUCTIONS
Downward Spray Zone
Right Wing
Spray Zone
Left Wing
Spray Zone
Closed
Open
MODEL RC-1B STANDARD SPRAYER
CONTROL
Sprayer Console
1.
Master Switch
– Switches power to the boom
switches. Always use this switch to cut off the
entire boom.
2.
Boom Switches
– Three ON/OFF switches
for individual boom sections. (Two, four, or five
switches optional.)
3.
Regulator Switch
– Forwards or reverses
the regulator motor, which raises or lowers the
spraying pressure. Small pressure changes can
be made by jogging the switch up or down.
4.
Pressure Gauge
– It is recommended that the
tubing to the pressure gauge be connected to the
center of the boom.
Find a convenient place to mount the console. Use
the holes in the mounting bracket as a template to drill
holes for the mounting screws.
The RC-1B Remote Control System provides the
freedom of mounting the control valves anywhere on
the sprayer. This can eliminate long boom, pressure,
and bypass hoses.
Quick disconnects permit permanent installation of the
valve assembly on the sprayer and the control box in
the tractor cab.
4
3
2
1
Summary of Contents for SnowEx Liqui Maxx
Page 2: ......