Lit. No. 74171, Rev. 00
9
September 15, 2020
MOUNTING THE TANKS
INSTALLING THE TANK MOUNTING
BRACKETS
Position the tank tray as shown below and secure
each tank mounting bracket with four 3/8"
fl
anged cap
screws and 3/8" locknuts.
MOUNTING THE TANKS
NOTE: While handling the hopper, ensure that the
hopper mounting bolts do not damage the liquid
tanks.
If this is a new hopper spreader installation,
follow the installation steps as outlined in the hopper
spreader Installation Instructions. Once the spreader
has been located in the vehicle and the mounting
holes have been made, remove the spreader from
the vehicle. Ensure that the mounting bolts are in the
mounting bar holes before installing the liquid tanks
to the hopper spreader.
If this hopper spreader has been previously
installed in the vehicle,
remove the hopper from
the vehicle. Ensure that the mounting bolts are in the
mounting bar holes before installing the liquid tanks to
the hopper spreader.
Once the tanks have been installed onto the hopper
spreader, place the spreader back into the vehicle,
and mount it to the vehicle as described in the hopper
spreader Installation Instructions.
3/8" Flanged
Cap Screws
3/8"
Locknuts
Tank Mounting
Bracket
