Lit. No. 74171, Rev. 00
7
September 15, 2020
3. Fasten the pump box mount bracket to the pump
box using four 3/8"
fl
anged cap screws.
4. From the passenger's side of the spreader,
fi
nd the
two 3/8"
fl
anged cap screws that fasten the extension
cover to the auger. Remove the 3/8"
fl
anged cap
screw that is closest to the hopper body.
5. Position the pump box bracket as shown in the
diagram. Using two 3/8"
fl
anged cap screws and
3/8" locknuts, fasten the pump box bracket to the
rear support
fl
ange. Reinstall 3/8"
fl
anged cap
screw that was removed in Step 4.
MOUNTING THE PUMP BOX
1. Remove all packing material from the liquid kit
before installation.
2. Remove the chute and trough extension cover
with electrical box.
MOUNTING THE PUMP BOX
Chute
Electrical
Box
Trough
Extension
Cover
Auger Extension Cover
3/8" Flanged
Cap
Screw
3/8" Flanged
Cap Screws
Pump
Box
Pump Box
Mount Bracket
3/8" Flanged
Cap Screws
