background image

 

LIMITED WARRANTY 

DOTWORKZ

,

 INC

.

 PRODUCTS

 

 

DOTWORKZ SYSTEMS INC.  

Warrants this Product to be free from defects in material or workmanship, as follows: 

 
PRODUCT CATEGORY 

 

 

PARTS 

 

 

 

 

LABOR

 

All Enclosures and Electronics 

One (1) Year 

One (1) Year

 

Power Supplies 

One (1) Year 

One (1) Year

 

Accessory Brackets 

One (1) Year 

One (1) Year

 

 
During the warranty period, to repair the Product the Purchaser will deliver it to Dotworkz Systems Inc. San Diego, CA, or return the defective product, freight prepaid.  The 
Product to be repaired is to be returned in either its original carton or a similar package presenting an equal degree of protection with a Return Materials Authorization 
number displayed on the outer box or packing slip. To obtain RMA # you must contact our Technical Support Team at 

866-575-4689. 

 Dotworkz Systems will return the 

repaired Product, freight paid.   Dotworkz Systems is not obligated to provide Purchaser with a substitute unit during the warranty period or at any time.  After the applicable 
warranty period, Purchaser must pay all labor and/or parts and shipping charges.  
 

The limited warranty stated in these product instructions is subject to all of the following terms and conditions: 

1. 

NOTIFICATION OF CLAIMS: WARRANTY SERVICE: 

If Purchaser believes that the Product is defective in material or workmanship, then a written notice 

with an explanation of the claim shall be given promptly by Purchaser to Dotworkz Systems but all claims for warranty service must be made within the warranty period. If 
after investigation Dotworkz Systems determines that the reported problem was not covered by the warranty, Purchaser shall pay Dotworkz Systems for the cost of 
investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period as to the 
entire Product. The specific warranty on the repaired part only shall be in effect for a period of ninety (90) days following the repair or replacement of that part or the 
remaining period of the Product parts warranty, whichever is greater

 

2. 

EXCLUSIVE REMEDY: ACCEPTANCE: 

Purchaser's exclusive remedy and Dotworkz System’s sole obligation is to supply (or pay for) all labor necessary to repair any 

Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts

 

3. 

EXCEPTIONS TO LIMITED WARRANTY: 

Dotworkz Systems shall have no liability or obligation to Purchaser with respect to any Product requiring service during the 

warranty period which is subjected to any of the following: abuse, improper use, negligence, accidents, lightning damage or other acts of God (i.e., hurricanes, earthquakes), 
modification, failure of the end-user to follow the directions outlined in the product instructions, failure of the end-user to follow the maintenance procedures written and 
recommended in the product instructions and service manual, or recommended by the International Security Industry Organization. Furthermore, Dotworkz Systems shall 
have no liability where a schedule is specified for regular replacement, maintenance or cleaning of certain parts (based on usage) that the end-user has failed to abide to 
such schedule; attempted repair by non-qualified personnel; operation of the Product outside of the published environmental and electrical parameters; if such Product's 
original identification (trademark, serial number) markings have been defaced, altered, or removed.  Dotworkz Systems excludes from warranty coverage Products sold AS IS 
and/or WITH ALL FAULTS and excludes used Products which have not been sold by Dotworkz Systems to the Purchaser. All software and accompanying documentation furnished 
with, or as part of the Product is furnished "AS IS" (i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license 
agreement furnished with the Product.

 

4. 

PROOF OF PURCHASE: 

The purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility. 

 
DISCLAIMER OF WARRANTY 

EXCEPT FOR THE FOREGOING WARRANTIES, DOTWORKZ SYSTEMS HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESSED OR IMPLIE D, INCLUDING, BUT 

NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY WARRANTY WITH REGARD TO ANY CLAIM OF 1NFRINGEMENT THAT MAY BE 
PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. DOTWORKZ SYSTEMS HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY 
THAT THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-V1DEOLARM PRODUCTS OR NON-DOTWORKZ SYSTEMS RECOMMENDED PRODUCTS THAT THE PURCHASER CHOOSES TO CONNECT TO THE 
PRODUCT.

 

LIMITATION OF LIABILITY 

THE LIABILITY OF DOTWORKZ SYSTEMS, IF ANY, AND PURCHASER'S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND WH ATSOEVER, 

REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT DP CONTRACT SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRIC E OF THE PRODUCT WITH RESPECT TO WHICH SUCH 
CLAIM IS MADE. IN NO EVENT SHALL DOTWORKZ SYSTEMS BE LIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING BUT NOT LIMITED TO 
COMPENSATION, REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS, OR FOR ANY OTHER REASON WHATSOEVER. 

 

 

Summary of Contents for HD12-CD-HB

















Reviews: