DOTWORKZ HD12-CD-HB, Installation Instructions Manual

Page: 5 / 16

5
PRODUCT INSTALLATION PRECAUTIONS – WARNINGS –
ADDITIONAL INFORMATION
(RETAIN THIS DOCUMENT)
IMPORTANT SAFEGUARDS
1 Read Instructions - All the safety and operating instructions should be read
before the unit is operated.
2
Retain Instructions -The safety and operating instructions should be retained for
future reference.
3.
Heed Warnings - All warnings on the unit and in the operating instructions
should be adhered to.
4. Follow Instructions -All operating & user instructions should be followed.
5.
Electrical Connections - Only a qualified electrician should make electrical
connections.
6. Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards
7. Cable Runs - All cable runs must be within permissible distance
8. Mounting -This unit must be properly and securely mounted to a supporting
structure capable of sustaining the weight of the unit. Accordingly:
a. Installation should be made by a qualified installer.
b. Installation should be in compliance with local codes
c. Care should be exercised to select suitable hardware to install the unit,
taking into account both the composition of the mounting surface and
the weight of the unit. Be sure to periodically examine the unit and the
supporting structure to make sure that the integrity of the
installations intact. Failure to comply with the foregoing could result
in the unit separating from the support structure and falling, with
resultant damages or injury to anyone or anything struck by the failing
unit.
SERVICE
If the unit ever needs repair service, customer should contact Dotworkz Systems +1
(619) 224-LIVE (5483) for return authorization & shipping instructions.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE
COMPONENTS TO WATER OR MOISTURE
The lightning flash with an arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of non-insulated "dangerous
voltage" within the
product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance
UNPACKING
Unpack carefully. Electronic components can be damaged if improperly handled or
dropped. If an item appears to have been damaged in shipment, replace it
properly in its carton and notify the shipper.
Be sure to save
1. The shipping carton and packaging material. They are the safest material in
which to make future shipments of the equipment.
2. These Installation and Operating Instructions.

For technical questions or product returns – call Dotworkz Customer Service (866-575-4689) 7:30 AM to 4:30 PM
(PST). The proper technician will contact you as soon as possible.

The External Nut on All electrical wire feed Glands must be tightened to create a weather tight seal prior to putting
HD-12 in service. Failure to create this seal may result in water incursion into enclosure. This may lead to electrical
shock, product failure and damage to electrical systems installed within enclosure, including but not limited to
damage to camera, heater and blower circuitry, cooling circuitry and other systems installed in unit.

All screws supplied for hinged lower must be tightened to create seal on enclosure. Failure to create this seal may
result in water incursion into enclosure. This may lead to electrical shock, failure and damage to electrical systems
installed within enclosure, including but not limited to damage to camera, heater and blower circuitry, cooling
circuitry and other systems installed in unit.

Do not over tighten any Screws, Stand Offs, or other fasteners on this unit. Failure to heed this warning will cause
damage or failure of the HD-12 enclosure.

This installation requires a minimum of two people . Do not attempt to install this enclosure by yourself.

Be sure to take extra care to protect domed (“bubble”) lens of unit prior to installation, during installation, and during
service. Failure to protect lens will adversely affect product performance.