V. OPERATING PROCEDURE
1. This meter can be supplied with batteries or DC 9V AC Adaptor.
If using batteries :
Remove the rear cover, and install batteries, pay attention to the
polarity of battery socket. If using 9V Adaptor, make sure that it is
in good connection to the Adaptor socket of the meter. Choose the
K-type temperature probe for your application and insert it into T2
the temperature probe socket. Insert Humidity/Temperature (T1)
probe into T1 the meter socket.
2. Press the
button to power on the meter, the current date and
time will displayed about 3 seconds. If “- - -” appears, it indicates
no probe or the probe is broken.
3. T1 indicates room temperature, T2 indicates K-type thermocouple test
value.
4. Printing data :
Press PRINT one time to print one set data.
If need continuous printing, press and hold down PRINT button,
until LCD display “INTV” mark and enter continuous interval printing
mode, the printer will print data, as follows :
INTV 00 : 06
10
：
55
：
19 08-16
62.7
%RH
td 19.8
℃
T1 27.6
℃
T2 26.5
℃
10
：
55
：
25 08-16
62.7
%RH
td 19.8
℃
T1 27.6
℃
T2 26.5
℃
-8-
10
：
55
：
31 08-16
62.7
%RH
td 19.8
℃
T1 27.6
℃
T2 26.5
℃
10
：
55
：
37 08-16
62.7
%RH
td 19.8
℃
T1 27.6
℃
T2 26.5
℃
Press PRINT or FEED key to exit printing mode.
When the meter is powered on, if the printing function setting is
“ON”, and now time is interval printing start time, the meter will
enter to continuous interval printing mode and start printing.
※
Press PRINT or FEED key to exit printing mode.
※
The interval printing function works only when the start
printing time is earlier than the stop printing time, and interval
print time can not be longer than 24 hours.
Caution : Before printing, please check thermo-paper is not clipped by
thermo-paper cover, if anything interrupts the printer, the
meter will shut off the printer pow
er, and “
” symbol
flickers.
-9-
→
Interval printing time, minute : second.
→
Printing time, hour:minute:second, month:day
→
Humidity test value and unit.
→
Dew point and unit.
→
Room temperature test value and unit.
→
K-type thermocouple test value and unit.
