III. NAME OF PARTS AND POSITION
Fig-1
1. LCD
：
Measured values, unit ,symbols, and decimal points
are displayed.
2.
：
Key for power on/off
3.
℃
℉：
Key for exchanging temperature unit
℃
and
℉
.
4. PRINT
：
Key for start printing current data. The format as below:
LINE 1
20
：
12
：
01 02 - 21
LINE 2
58.9 % RH
LINE 3
td 15. 7
℃
LINE 4
T1 24. 3
℃
LINE 5
T2 24. 8
℃
-4-
Line 1 : printing time hour: minute: second, month- day.
Line 2 : printing humidity value.
Line 3 : printing Dew point value.
Line 4 : printing T1 temperature value.
Line 5 : printing T2 temperature value (K-Type).
Press this button for 2 seconds, the printer will enter interval
printing status, and won’t stop unless this button is pressed
again or FEED button is pressed.
5. DC 9V AC adaptor input jack.
6. FEED PAPER (Fig-2) :
Key for moving forward thermo-paper one line.
Perform force stop printing, and skip any printing data.
7. DEW-POINT:Key for changing humidity to dew-point display.
8. MAX / MIN
：
Fig-2
Press this key one time to enter maximum /minimum
record mode, the “REC” symbol is displayed.
Press this key to display the maximum reading (“MAX REC” symbol
displayed), the minimum
reading (“MIN REC” symbol displayed)
and the current reading (“REC” symbol displayed) in cycle.
Press this key 2 seconds to exit this mode.
9. HOLD : Key for holding the display reading and press again to
exit.
10.
MENU
：
Key for start/stop set-up parameters mode.
Parameters (in sequence):
ON/OFF (interval printing enable or disable).
TIME INTV (printing interval ranging from 00m:06s to 59m:59s).
INTV (Interval printing start time ranging from 00h:00m to 23h:59m).
INTV
(Interval printing stop time ranging from 00h:00m to 23h:59m).
TIME (Calendar setting year, month, day, hour, minute).
-5-
