1. Introduction
Dear customer,
Thank you very much for purchasing one of our products. Before operating the data logger please read this
manual carefully. You will get useful information for understanding all functions.
1.1 General advice
For cleaning the instrument please do not use an abrasive cleaner only a dry or wet piece of
soft cloth.
Please store the measuring instrument in a dry and clean place.
Avoid any force like shocks or pressure to the instrument.
Do not use force to connect the probe or the interface plugs in. The interface plug is different
from the probe plug.
1.2 Before operation
Before operating the instrument take the instrument out of the packaging. Check whether a full battery
is already inserted.
1.3 Standard settings / Factory settings
Note the following default settings of the data logger before first use. By using the DE-LOG-Graph
software, the setting parameter can easily be changed:
1. Description: blank(max. 16 characters)
2. LCD-Snooze mode:X
3. LCD-Snooze after Sec.: 10
4. Mode-button active:X
5. Alarm settings for temperature
X -30,0°C
X 70,0°C
X -40,0°C
X 150,0°C
Alarm settings humidity
X 0,0%
X 100,0%
6. Alarm delay: 0 cycle
7. Alarm cumulation: off
8. Alarm indication: LED- and Buzzer (1 second)
9. Alarm reset:X
10. Time setting
11. Temperature unit: °C
12. Start-button active: X
13. Start by Reed-contact: (by request only)
14. Waiting for manual start: X
15. Single use only: X
16. Measuring interval: 15 Minutes
17. Stop-button active: X
18. Stop by Reed-contact (by request only)
19. Cycle memory:X (if the memory is full the oldest measurement will be overwritten)
1.4. Marking
CE-conformity, EN 12830, EN 13485, Suitability for storage (S) and transportation (T) for food storage
and distribution(C), Accuracy classification 1(-30..+70°C), according to EN 13486 we recommend a
recalibration once per year.
