Step 3:
The LCD screen will display the zone status. To change the status to
NO
or
YES
options, press the "UP/DOWN" buttons. To save the changes press the
"
#
" key.
Note:
The number appearing in the middle of the LCD display shows how
many devices are registered in that zone. If the number is a 0, there
are no devices registered in that zone and you will not be able to
change the zone status.
Step 4:
When you press the "
#
" key the LCD screen automatically shows the next
zone. Press the "UP/DOWN" buttons to select the desired zones or stop the
process and exit the menu by pressing the "
*
" key.
45
ARMING AND DISARMING
The
Doss
Alarmfone
can be armed and disarmed via Remote Control
or directly from the telephone key pad. You can also arm and disarm
the security system from a remote location.
Arm via Remote Control:
Press and hold the "ARM" key on the Remote Control for
one second.
Disarm via Remote Control:
Press and hold the "DISARM" key on the Remote Control
for one second.
Partially Arming via Remote Control:
Press and hold the "PARTIAL" key on the Remote Control
for one second.
Partially disarming via Remote Control:
Press and hold the "DISARM" key on the Remote Control
for one second.
Press the "ARM/DIS" button on the
Main Unit and enter your four digit
password. (Default password 1234) The
delay time for you to leave the premises
can be set to either two or four minutes.
Arm and Disarm via Keypad:
46
CLEAR YES
CLEAR NO
REGISTER NEW
PARTIAL
CLEAR ZONE
BASE NO.
DEL BASE NO.
DELAY TIME
SIREN TIME
STATUS TO BASE
CHANGE PSW
PIR LOW POWER
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
ZONE 7
ZONE 8
ZONE 9
ZONE 10
STEP 1
STEP 2
Press
*
key to exit
Mon
PM
DISARM
12:30
10 04
06
Z ONE 2
Mon
PM
DISARM
12:30
10 04
06
CL EA R
NO
2
