11
7. Operation
Calling by the visitor
While the visitor press the Call button, the Ding Dong sound will be
heard from the indoor monitor, and the picture of the visitor is displayed
on the monitor screen. If no people at home or fail to press
button in time, the screen will be closed automatically at 60
seconds.
When seeing the picture of the visitor, press the
button
to communicate with the visitor, and press the button again to turn off
the monitor. If the communicate continue over 60 seconds, the screen
will be closed automatically.
You can press the Unlock button to open the door and let the visitor in.
In house intercom:
While standby mode, click "intercom" button, thereafter, the other indoor
monitors will Ring, and they can pick up the handset or click answer
button to communicate.
(PS.: there must be more than one indoor monitor to be connected in the
system to achieve this function)
Stakeout
While standby state, press the Monitor button to display the outdoor
picture.
Other operation
If you think the monitor volume is not applicable or the picture shown on
the screen is too light or too dark, you can adjust the Communication
volume, Brightness and Rintone volume knob to reach pleased effect of
volume and picture.
Monitor/
Monitor/
answer
answer
