Moving & Towing to Job Site
12
7.
Put Jack Up
To provide adequate ground clearance while towing, secure the jack in the “UP”
position.
8.
Tow to
Desired
Location
Tow log splitter carefully to desired work site.
(See instructions on pg.16 on selecting an appropriate work site.)
Important safety instructions
:
Added length
. Be aware of the added length of the splitter.
Speed limit
. Never tow this log splitter over 55 MPH on pavement and 45 MPH
on gravel. Faster speeds may result in loss of control.
Rough terrain
. Drive slowly and take extra caution when traveling over rough
terrain.
On public roads
. If towing on a public road, make sure to comply with all local,
state, and federal towing requirements. It is the sole responsibility of the
purchaser to obtain licensing, trailer lights, safety chains or signage, as needed to
comply.
Unattended
. Turn off the towing vehicle before leaving the splitter unattended.
Under the influence
. Never tow or operate this splitter while under the
influence of alcohol, drugs, or medication
.
9.
Lower Jack
Down &
Unhitch
Lower the jack down and then unhitch from vehicle.
NEVER operate log splitter while it is attached to the vehicle.
1.
Lower the jack and use it to lift the coupler slightly to assist in unhitching.
2.
Unhitch from vehicle.
Hook both safety chains
to the towing vehicle
Pull latch and swing
jack to the
UP
position
