Special Usings, Recommendation
Measuring moisture in
caravans, trailers, moble homes
For this using we are producing instrumenst with shorted sensors as showed in the picture nearby.
With such sensors measurements can be made in edges without being influeced through the adjoined
wall.
We recommend the material settoing HD5(H) (code 31)
measurement:
1.
1.
make a reference measurement at a dry place
2.
2.
change the material setting til the instrument shows approx. 5%
3.
3.
now different similar places can be checked for higher moisture content.
Attention:
Frames may also causes higher moisture readings. Therefore the instrument also can be used
to detect frames.
Moisture measurement in plastic boates:
Caused through Osmose plastic boates can get blisters below the water line. At thsi blistes the moisture in the
plastic rises up. Befor starting a repair such parts must be completely dry. To measure this we recommend to
select the wood material group, material no. 0. The surface of the place where you need to measure must be dry!
Measurement:
1.
1.
take a reference measurement above the water line
2.
2.
select the material no. till the reading is approx 10%
3.
3.
now you can measure at similar places to see the moisture
differences.
Summary of Contents for DM 4 A
Page 1: ...Feuchtigkeitsmessger te Moisture Meter Humidim tre...
Page 4: ......
Page 6: ......
Page 7: ......
