Dosapro Milton Roy G A Series, Instruction Manual, Page: 5 / 40

G, A, 51/61, L001, Rév. E, 0998
HOW TO USE THIS MANUAL ?
IMPORTANT : You should read the following paragraphs carefully in order to understand how to use this manual
efficiently.
This manual corresponds to the type of pumps
mentioned on the cover page.
There may be several different construction versions for
each type of pump, however, and this manual takes
those differences into account.
The paragraphs or lines specific to a given construction
are:
•
indented compared to the main text body,
•
marked by a vertical line indicating the specific
text,
•
marked by a rectangle specifying the
corresponding code.
Note : When first reading this document, you are
advised to highlight the « boxes » corresponding to the
construction of your equipment so the manual will be
easier to read in future.
MARKING USED IN THE MANUAL
You will find the list of the various possibilities and the
corresponding markings, at the end of the illustrations
manual.
In addition, to identify the type of construction of your
pump, the table includes the pump code shown on the
identification plate attached to the pump (Fig. 4.5a).
Caution : only characters mentioned are to be taken
into account when reading this manual.
Examples of pump code :
Pump flow rate
î í
Liquid en matrial
GA 5 P 1M 3
ç
Power type
Mark Description
P Liquid end PP
D Liquid end PVDF
S Liquid end, stainless steel
V High-viscosity version
4FV* 4-function valve
3 3-phase power supply
2 Single-phase power supply
A
Débit
≤
45 l/h
B
Débit
>
45 l/h
* Available as option for pumps equipped with plastic liquid ends.22 l/h.
Nota
•
For the sake of simplicity, the procedures described do not mention the washers fitted with fasteners (such as
screws and nuts). Do not forget to reinstall washers after removing them.
•
Verify that parts are undamaged before reinstalling.