Air cap LS
The air cap LS is used for abrasive coating
materials such as enamel and glaze.
Air cap LG
The air cap LG is used for high outflow rates.
It is used for application of viscous, highly
viscous coating materials.
6.4
Changing the air cap
Protective equipment:
Protective workwear
Protective gloves
Removing the air cap
Fig. 6: Removing the air cap
1. Loosen cap nut (1).
2. Remove the air cap (1).
Assembling air cap
3. Place the air cap (1).
4. Align the air cap as required
5. Tighten cap nut (1).
6.5
Alignment of the air cap
Protective equipment:
Protective workwear
Protective gloves
The position of the air cap determines the
alignment of the spray pattern.
Fig. 7: Air cap alignment
1. Lightly loosen cap nut (2).
2. Turn the air cap (1) as required for the
desired spray pattern.
3. Tighten cap nut (2) by hand.
Operation
12/2016
EcoGun 249 - MSG00014EN
10/40
