English
Base settings
Base PIN is 0000 on delivery.
1.
Press
Menu
.
2.
Scroll to
Settings
. Press
OK
.
3.
Scroll to
Base settings
. Press
OK
.
4.
Scroll to desired function e.g.
Exchange code
. Press
OK
.
5.
Scroll to desired setting. Press
OK
.
Ringer
The base unit’s ring signals can be set at several different levels.
HS priority
You can decide whether all handsets should ring at once when there
is an incoming call, or if one handset should start ringing before the
others. You can set the number of ring signals for this function as well.
Dial mode
Must be in tone in most countries.
Flash time
Only for adaptation to international company switchboards. For most
countries, the setting is 100 ms.
Msg Wait Off
To turn off the message indication manually.
System PIN
You can change the PIN code (0000 on delivery).
Exchange code
Enter the digit that obtains an external line and the telephone will
insert a pause automatically when a number starts with that digit.
ECO mode
When this function is enabled, less power is consumed when the handset
is in close proximity to the base. If you are experiencing problems with
the range, shut this function off. Furthermore, if you use one handset
only, the power consumption will also be lower during charging.
System reset
Reset base unit.
Register a new handset
All new handsets that are to use the base unit must be registered.
See also the Expanded Systems chapter for more information.
1.
Press
Menu
. Scroll to
Setting
. Press
OK
.
2.
Scroll to
HS Settings
. Press
OK
.
3.
Scroll to
Register
. Press
OK
.
4.
Scroll to the desired base. Press
OK
.
5.
Enter the base unit’s PIN code (0000 on delivery). Press
OK
.
6.
Hold down the base unit’s search button
J
until a beep is heard.
7.
If the registration is successful the handset will return to standby mode within one
minute.
