4
Doro Care mBox
869MHz
Basic functions
5-1 0 mm
By opening the sliding cover to the first
position access are given to the function
selector with 10 optional setups.
Choose position,
A
-
J
, depending for how the
unit shall be used. Use a suitable screwdriver
for setting the knob in correct position.
See the following for the preprogrammed
positions used for mBox together with a
chaor or bed sensor. Positions
A
and
D
-
J
are used for other applications and are not
described in this document.
B – Bed/chair alarm 10 seconds
When mBox are set to position
B
, the unit
is, in combination with a bed/chair sensor*, working as bed/chair alarm.
A short push on the reset button gives following functions in position
B
.
•
The alarm monitoring is initiated if pressure is applied on the sensor for more than
30 seconds. An alarm is sent if the person is missing (loss of pressure) for more
than 10seconds. Loss of pressure for less than 10 seconds will not send an alarm.
C – Bed/chair alarm 15 minutes
When mBox are set to position
C
, the unit is working the same as in position
B
, but
allowing 15 minutes absence (loss of pressure) before an alarm is sent.
