English
Message indication (voice mail box)
This applies only to subscribers with access to a voice mail service.
The telephone has a function that facilitates dialling/listening to this service.
In addition, if you subscribe to services for message indication and caller ID the display
will show if some one has left a message.
A new message is indicated then with the text
Mailbox
on standby (only applies in
certain countries).
Please note!
The telephone number to call voice mail depends on the network and must be programmed see
Service
codes
under
Changing settings in the base menu
further on in this chapter.
Playback with hot key
1.
Hold
1
pressed down for a few seconds.
2.
Listen to the information/messages received.
3.
Press
L
to terminate the call.
Other services
Most usual operator/extra services can be accessed via the menu
W
during a call.
Please note!
The functions available will depend on your service provider.
You may have to pay extra for some services, contact your service provider for more information.
Some services will not work unless you have contacted your service provider to activate them.
Using the Flash button manually
1.
Connect an external call and wait until the timer is shown. Press
R
.
2.
Enter telephone number or manual code. Press
W
.
Busy number/call waiting
1.
Connect an external call and wait until the timer is shown. Press
W
.
2.
Scroll to required service. Press
W
.
-
Call internal
(see
Expanded System
).
-
CW accept
Answer incoming call waiting (=
R
2
).
-
CW reject
Refuse incoming call waiting and send engaged tone (=
R
0
).
-
Auto Redial
When a number is engaged. When the number is free you will hear a
quick ring signal (=
5
).
Under inquiry/alternating/answered call waiting
Use the respective menu button:
-
Brokering
Switching between two calls (=
R
2
).
-
Conference
Conference/three party call (=
R
3
).
Summary of Contents for 635ipw
Page 151: ......
