Dorner 62M005ESBDDEN, Installation, Maintenance, And Parts Manual

Page: 11 / 20

851-738 Rev. A 11 Dorner Mfg. Corp.
Brushless DC Motor Control
Installation
9. Twist covers (Figure 20, item 1) together, as shown.
Figure 20
Figure 20
For Remote ON/OFF Signal:
1. Remove access plug (Figure 21, item 1) .
Figure 21
Figure 21
2. Open controller by loosening four plastic cover screws
(Figure 21, item 2) , and removing controller case cover
(Figure 21, item 3) .
3. Remove controller cover (Figure 22, item 1) .
Figure 22
Figure 22
4. Install cord grip, not provided (Figure 22, item 2) .
5. Insert external signal wires to terminals (Figure
22, item 3) . See “External Input Signals” on page 12.
6. Be sure to configure controller for remote signals. (See
“Switching the Signal Method to Remote Signal (If
Required)” on page 17 for details.)
DANGER
SEVERE HAZARD!
Hazardous voltage will cause severe injury
or death. LOCKOUT POWER BEFORE
WIRING.
1
2
3
1
1
1
2
3