12-2020
dormakaba Canada Inc. RAC5 MFC Installation Guide – PK3738 | 7
2.2.2 Contactless Card Reader
The Contactless Card Reader is a small mounted unit that protrudes from the wall and is used with RFID-based
keycards.
Figure 3 – Contactless Card Reader
3 Checklist and Exploded Views
3.1 Parts and Tools List
NOTE:
Some items are dependent on the options or configuration purchased. Please ensure all parts ordered
and required for installation are available before starting. Parts are subject to change without notice. For letter
designations, refer to Figure 4.
3.1.1 RAC5 MFC Enclosure
NOTE:
All items below come factory installed.
(A)
RAC5 MFC enclosure with access door
(B)
Power Supply: 24 VAC / 24 VDC input, 12 VDC output
(C)
Controller PCB
(D)
Tamper switch
(E)
2-panel mounted LEDs (green) for power and battery status
(F)
Cam-lock
3.1.2 Relay Expansion Board
(G)
8 Relay expansion PCB boards, including 4 x 6-32 x 3/8” SS screw with washer and controller PCB
connection cable (not shown)
3.1.3 Cables (not shown)
NOTE:
All items come factory installed.
(H)
System cables: Power supply to LEDs, controller PCB and controller PCB jumpers
3.1.4 Card Reader(s)
(I)
Contactless reader (see Figure 3)
