5
P/N 731.018 Rev I • 05/18
©
copyright 2008-2018
dormakaba
e. Plug the USB or Serial Interface Adapter into an available USB port on the PC.
If using a USB Adapter
, the list of ports will be updated to reflect the new device. The LA GARD USB Interface
Adapter can be identified in the list as
USB Serial Adapter
. The virtual COM Port assigned to the USB port where the
Adapter is currently installed will follow the device description (Figure 2).
Figure 2.
If using a Serial Adapter
, identify the standard Serial COM Port to be used. Standard Serial COM Ports are
identified in the list with a description of
Communications Port
.
2. From the Setup software, select the
Configuration
menu on the Menu bar.
The list of available COM Ports will be displayed.
3. Select the appropriate COM port from the list (Figure 3). For a USB Adapter select the virtual COM Port assigned by the
system. For a Serial Adapter select the standard Serial COM Port to be used.
Figure 3.
