13
HSW EASY SAFE
20
3.11 Attaching the sliding panel
Insert the rollers (a) with the attachment blocks (e) of all the panels into the guide rail.
Pay attention to the arrangement of the guide rollers (high or low, see chapter 2.5).
Place the panel on 12 mm spacer blocks on the floor and insert the attachment blocks
on the left and right into the support profile (d).
Aligning the panel height:
Align the panel so that there is a 12 mm gap at the bottom (without cover profiles) between the floor and the base profile.
Loosen the nut for the height adjustment (c). Adjust the height via the nut (b) (17 mm wrench).
Turning left = more play at the bottom
Turning right = less play at the bottom
20,5
0
5
12
a
b
c
d
e
e
1
2
2
a
Spacer blocks
