Eccentric bushings are standard for the locking devices.
Adjustable locking plates are used for single-action sliding
panels with TS 92 and double-action sliding panels with plas-
tic bushings. Drill the borehole for the locking plate bush
ø 25 mm, at least 15 mm deep and at a distance of 65 mm
to the outer edge of the door. Also drill the 8 mm boreholes
for the wall plugs.
65
ø8
ø25
55
±4
ø25
ø8
65
min. 30
±2,5
Adjustable eccentric bushings are used as the standard
design with plastic inner sleeve. Drill the 8 mm boreholes
for the wall plug and also in the center the borehole for the
eccentric bushing ø25 mm, min. 30 mm deep and at a
distance of 65 mm to the outer edge of the door.
ø25
30
Insert the eccentric bushing in the continuous pipe.
min. 15
Locking plate
Eccentric bushing
Borehole ø 25 mm, 30 mm deep for the eccentric bushing and additionally ø 8 mm
for wall plugs. Align the eccentric bushings (double eccentric) and fix it with the
screw in the center.
3
4
HSW EASY SAFE
6
2.3
Preparation on the floor
2.4
Borehole for locking plate bush and eccentric bush